Hyde Drift Boats

The rear bench is removable and offers the angler additional storage under the seat. The bench is constructed of lightweight marine grade aluminum.

Seat not included.

The rear storage box provides additional dry storage. The box is constructed of lightweight aluminum and stainless steel whitewater latches.

*Price includes a $30.00 handling fee for packaging. Additional shipping charges apply.

Seat not included.

The adjustable front bench provides multiple seat configurations without the additional storage capacity provided by the front storage bench. This bench is constructed of lightweight aluminum.

*Price includes a $30.00 handling fee for packaging.

The adjustable front storage box provides additional dry storage while allowing for multiple seat configurations. The box is constructed of lightweight aluminum and stainless steel whitewater latches. The box will accommodate up to three seats.

*Price includes a $30.00 handling fee for packaging. Additional shipping charges apply.

Seats not included.

Designed for steelhead fisherman, the fish box provides convenient storage under the rower’s seat. The box is constructed of lightweight aluminum.

*Price includes a $30.00 handling fee for packaging. Additional shipping charges apply.

The walk around storage box provides additional storage and increased floor space. The box is constructed of lightweight aluminum and stainless steel whitewater latches. The box accommodates one seat and can be easily mounted in all three positions.

Seat not included.

Position:
Front
Rower
Rear

The adjustable rower storage box provides additional dry storage and added convenience. The box is constructed of lightweight aluminum and stainless steel whitewater latches. The 70/30-split lid design provides easy access to those often needed items. Gear trays are conveniently located on either side of the rower. The box comes standard with a 6” padded low back seat.

*Price includes a $30.00 handling fee for packaging. Additional shipping charges apply.

This box offers all of the features of the rower storage box. It has a strap seat instead of the standard low back seat.

*Price includes a $30.00 handling fee for packaging. Additional shipping charges apply.

The adjustable rower bench provides seating without the additional dry storage. The bench is constructed of lightweight aluminum.

Rower seat not included.

*Price includes a $30.00 handling fee for packaging.

The adjustable deep front box offers all of the features of the front storage box as well as additional dry storage. The box is two inches deeper than our standard front storage box.

*Price includes a $30.00 handling fee for packaging. Additional shipping charges apply.

Seats not included.

These dry compartments are designed to provide convenient out of the way storage. If you’re purchasing a side storage box for an aluminum drift boat, please call (800) 444-4933 to place your order.

These dry compartments are designed to provide convenient out of the way storage. If you’re purchasing a side storage box for an aluminum drift boat, please call (800) 444-4933 to place your order .

The removable rear leg brace is supported by two flush mount base plates and two 25 inch pedestals, providing a very sturdy platform for the single or double leg brace.

The lightweight fiberglass construction and design provides maximum comfort and security for the angler in the rear.

The lightweight fiberglass construction and design provides maximum comfort and security for the angler in the rear.

The removable rear leg brace is supported by two flush mount base plates and two 25 inch pedestals, providing a very sturdy platform for the single or double leg brace.

The high back seat provides maximum comfort and back support.

The Fish on Tempress seat is constructed of weatherproof molded plastic. It is the most durable lightweight seat available.

The Fish on Tempress seat is constructed of weatherproof molded plastic. It is the most durable lightweight seat available.

The most comfortable and durable cushion available. The seams are stitched, not welded, to provide superior strength and comfort.

The pedestal and pedestal base provide a secure platform for mounting a seat in the front or rear of the boat.

The sliding seat base plate easily attaches to most seats. It is fully adjustable and fits all storage boxes and bench seats. It is ideal for multiple seat configurations.

One of the greatest advancements in drift boat technology. G4 is the ultimate in bottom protection for fiberglass drift boats. The super slick polycarbonate material will eliminate the need for bottom maintenance and repair. Ideal for treacherous rivers.

G4 has to be picked up and installed in Idaho Falls, ID.

The ultimate bottom protection for aluminum boats. UHMW is the best protective material available for aluminum boats. It provides a slick durable surface that won’t stick to rocks.

UHMW has to be picked up and installed in Idaho Falls, ID.

Eliminates the hard edges on aluminum boat gunnels.

Please specify how many feet you would like while checking out.

Provides protection and a clean finish for fiberglass edges.

Please specify how many feet you would like while checking out.

Provides additional leverage while rowing.

Provides additional leverage while rowing. This foot brace is also adjustable to accommodate people of various heights who take turns rowing the boat.

Durable Crosstech flotation foam. Straps to aid in rescue. 200 Denier nylon oxford shell. Throwable device. U S Coast Guard Approved Type IV Device.

Color:
Blue
Orange

Adventure Medical’s waterproof first aid kit is very light with many features. Includes:
-Forceps
-Butterfly closure strips
-Tincture of benzoin
-Double antibiotic ointment
-Antiseptic towelettes
-Moleskin
-Motrin
-Antihistamine
-Afterbite sting relief towelette
-3×3 sterile dressings
-Non-adherent dressing 3×4
-Conforming gauze bandage 2”
-Tape
-Strip & knuckle adhesive bandages
-Cotton tipped applicators
-Nitrile examination gloves
-Antimicrobial hand wipe
-Bio-hazard sealable waste bag
-Waterproof matches, safety pins, and duct tape

An adhesive putty designed to repair fiberglass damage.

Designed specifically for drift boats. The shallow design eliminates the possibility of fly lines tangling up under the boat.

The bow eye provides a secure attachment for the wench.

All plastic replacement cup holders. Our older boat models typically use the small cup holders where all new models are equipped with large cup holders.

Cup Holder Size:
Large
Small

Lightweight graphite composite shaft wrapped and stopped with a sprayed eurathane coating. These oars have unmatched strength to weight ratio. The blade is also easily replaceable.

Cushioned comfort Indexed oar grips allow the rower to keep the blades vertical. Includes one set of two oar grips.

Required on some rivers the two piece spare oar can mount on the side of your boat in on a storage box with spare oar mounts. These oars are 9 feet but can be ordered in other sizes by phone (800) 444-HYDE. Disassembles into three pieces.

Oar also includes the blade and sleeve.

Constructed of UV material, the oar mounts allow you to conveniently mount a spare oar on the side of your boat in on a storage box.

Allows vertical adjustment for oar lock

Unlike traditional wood oar blocks, this lightweight material will not rot. The oar block also allows for three different oar lock positions.

Minimizes the number of oar strokes required by maximizing the amount of water displacement.

These adjustable plastic sleeve prevents the oar from sliding out of the oar lock. Good alternative for unwrapped oars. Includes two sleeves.

This quite rubber stop prevents the oar from sliding out of the oarlock.

Silicon coated bronze oar locks are extremely strong and durable. The polished finish provides additional protection for the oars.
Dimensions:
2” Yoke5
5/8” Shaft diameter
5” long shaft
About 8” in total length.

Keeps oar blade perpendicular in the oar lock.

Hyde anchors are constructed of steel, are environmentally friendly and are designed to hold drift boats in moving water while minimizing hang ups. Anchors are 30 lbs.

Durable & flexible anchor rope for drift boat anchor systems. Includes the carabiner and 50 ft. of rope.

Never forget your anchor again. This nest mounts directly to the trailer. The anchor fits securely in the nest while trailering the boat.

May be easily retrofitted on most drift boats. Includes anchor rope cleat.

The bow anchor arm may be used with or without a transom anchor system. Includes a jam cleat. Easy installation.

Easy installation on most boats. This five piece system is constructed of lightweight aluminum. Accessible from the rowers seat, the multiple pulley system provides ease of use.

Heavy duty jam cleat may be used for custom anchor systems. Easily retrofitted on most drift boats.

2 1/2 inch diameter teflon pulley housed in a cast iron casing.

This mechanism is conveniently released by stepping on the lever. The rope runs freely through the mechanism until pressure is released.

Allows easy retrieval and deployment of the anchor. Mounts on the side of the boat. May be easily retrofitted on most drift boats.

1 1/2 inch diameter teflon pulley housed in a cast iron casing.

The deluxe boat cover is provides superior protection for the exterior and contents of your drift boat. The cover is constructed of a waterproof nylon material.

If your drift boat is a 1998 model or older, please call 800.444.4933 to place your order.

Model:
Contender
High Side Combination
High Side Aluminum
Low Profile Combination
Low Profile Aluminum
Northwest Series
Skiff
Sportsman’s Drifter
XL High Side
XL Low Profile

In the past, mounting a motor on a drift boat has been difficult due to the distinct transom angle. Hyde Drift Boats has eliminated this problem by creating a lightweight platform that slides over the transom of most drift boats. The unique design provides superior strength, since it is supported on both sides. The motor mount is constructed of high-grade aluminum and will accommodate virtually any motor suitable for a drift boat. Due to its angled design, the Hyde Motor Mount doesn’t interfere with the anchor system thus eliminating the need to offset the anchor arm.

The innovative Hyde pulley system reduces the amount of effort needed while retrieving your anchor by fifty percent. Simple and easy to install on nearly all anchor systems, the EZ Pull mechanism includes all of the necessary parts to reduce fatigue while retrieving your anchor.

Two piece spare oar blade molded of high-impact, glass-filled synthetic material. Easy to assemble and store out of the way.

The convenient and preferred method for attaching and removing the anchor.

Offset the weight of the oar blade with counter balanced oars. Lightweight graphite composite shaft wrapped and stopped with sprayed eurathane coating. These oars have unmatched strength to weight ratio. The blade is also easily replaceable.

These self adhesive vinyl decals can be applied to virtually any smooth surface including boats, trailers, windshields and vehicles.

Size: Large (19”)

Color:
White
Black
Silver
Gold
*

Note: There are no refunds or exchanges on decals.

These self adhesive vinyl decals can be applied to virtually any smooth surface including boats, trailers, windshields and vehicles.

Size: Medium (12”)

Color:
White
Black
Silver
Gold
*

Note: There are no refunds or exchanges on decals.

These self adhesive vinyl decals can be applied to virtually any smooth surface including boats, trailers, windshields and vehicles.

Size: Small (9”)

Color:
White
Black
Silver
Gold
*

Note: There are no refunds or exchanges on decals.

The custom made padded rower seat provides comfort as well as free upper body movement.

The new Hyde 3 Point Leg Brace helps you to stand facing any side of your boat with leg support on both legs.

This combination is often referred to as, “The Cure.” This set up can replace our older style seat posts, and will fit into any boat with a 2” Springfield taper lock base. Cap mounts directly on the Tempress seat (If desired, seat button sold separately).

Hyde anchors are constructed of steel, are environmentally friendly and are designed to hold drift boats in moving water while minimizing hang ups. Anchors are 30 lbs.

This decal was personally designed by LaMoyne Hyde to illustrate the culture of the Northwest U.S. Made from strong vinyl material that will hold its color well on your boat.*

Standard Dimensions:
20 in. X 6.5 in. or
14 in. X 6.5 in.
(Length x Width)

Size:
20in.
14in.

Decal Direction**:
Mirrored
Same Direction

*Specialty colors and sizes can be ordered on request. Please call (800) 444-4933

**For Decals that will be displayed on both sides of a boat or vehicle, the usual method is mirrored.

Note: There are no refunds or exchanges on decals.

This is one of Hyde’s newest logos offered in rich colors. All logo’s fade from your chosen color to black.*

Standard Dimensions: 20 in. X 6.5 in.

(Length x Width)

Color:
Blue
Maroon
Green
Black
White

*Specialty colors and sizes can be ordered on request. Please call (800) 444-4933

Note: There are no refunds or exchanges on decals.

3.5 H.P. Nissan/Tohatsu motors are the perfect fit for a drift boat. They are manual start, 20” long shaft, 4 cycle.

Features Specifications Dimensions

Tohatsu 4-Stroke Benefits
* Water cooled and thermostatically controlled cooling system for consistent engine temperature
* Digital CD ignition system for easier starting, quicker throttle response and smoother trolling
* Forward-neutral shifting with 360° steering
* Easy to check oil level gauge indicator located on the engine’s side
* Light and compact
* Convenient carrying handle
* Ultra Low emission, EPA 2006 and CARB 3-Star rating approved
* 3 Year limited warranty

The motor casing will show a Tohatsu or Nissan decal. (The photos above depict a model with Tohatsu decals). We ship both types but the motors are identical. To specify if you want a Tohatsu or Nissan decal on your motor please call (800) 444-HYDE before ordering.

This new decal from Hyde helps you to measure your catch of the day. Made from a durable vinyl material. About 27” long*.

*Specialty colors and sizes can be ordered on request. Please call (800) 444-4933.

Note: There are no refunds or exchanges on decals.

This pulley by Ronstan facilitates a 12mm wide rope (or 1/2”). The pulley has a locking ring at the top that can be opened for attachment and securely screwed closed. Built with a quality bearing for easy rotation.

Beckson “Thirsty Mate” hand bilge pump is always important to have in you boat during those time you take in a little water. The model is all plastic so it will not corrode, it is self lubricating and easy to clean. Hose is detachable for storage.

Made of a durable nylon material these liner will work as replacements for Hyde Boat rod tubes and other boat brands. Contains a cloth divider to allow for two rods the be stored with out tangling your lines in the tube.

The new Hyde 3 Point Leg Brace helps you to stand facing any side of your boat with leg support on both legs. Assembly includes the 3 Point Leg Brace Horn, two aluminum posts, and two flush mount kingpin floor bases (with brass inserts). For questions about how you configure this brace to your boat model please call us at (800) 444-4933.

Inner ring is made of stainless steel and outer coating is made of a hard durable plastic. Ring diameter is 1 inch.

All plastic fair lead. 5/8” in diameter.

Decal with trout and red Hyde logo. Adhesive sticker on back of decal.
Dimensions: 3 inches X 5 inches

Note: There are no refunds or exchanges on decals.

With a moderate amount of back support this seat is very durable and have a standard bolt mounting pattern.

Lightweight graphite composite shaft wrapped and stopped with sprayed eurathane coating. These oars have unmatched strength to weight ratio. Oar blade not included.

Size:
9 Foot
9.5 Foot

Type:
Standard
Counter Balanced

Counter balanced oar shafts are also available. Extra weight is put into the oar handle to help off-set the blade and shaft weight. This makes your oars easier to hold and row all day.

Required on some rivers the two piece spare oar can mount on the side of your boat in on a storage box with spare oar mounts. These oars are 9 feet but can be ordered in other sizes by phone (800) 444-HYDE.
Includes sleeve.
Blade sold separately.

Required to have a sounding device in your boat on Idaho rivers. Good to have in the case of an emergency. Made from a durable plastic with a nylon cord for attachment.

Pair of brass Oar Locks made to fit 1” – 3/8” oar shafts. Popular for Hyde’s Sportsman’s Drifter, various rafts or small boats. Smaller then Hyde’s standard oar lock.

Made from welded aluminum, this is the bracket we use as standard on all new Hyde Drift Boats. Includes a loop for attachment of and EZ Pull anchor assembly if desired.

Universal anchor arm, can be added to aluminum, fiberglass, or wood boats. Available for a side anchor system, floor anchor system, or a universal cleat system (All depending on which type of pulley or cleat is attached to the bracket). Please call at (800) 444-HYDE for questions about which option is right for you. Options for which type of system are below.

Anchor System Type:
Side Anchor System
Floor Anchor System
Cleat Anchor System

The walk around storage box provides additional storage and increased floor space. This box is constructed of lightweight aluminum and includes stainless steel whitewater latches. To accommodate various heights of the person rowing the boat, the floor plate allows the storage box to be adjusted to positions forward or back.

Rower’s seat not included.